NOT ALL RESINS ARE MADE EQUALLY.
Xi+ is our pH regulated ion exchange resin designed to condition the fill water and existing circulating water in accordance with VDI 2035.
Regulating the pH & electrical conductivity at point of fill puts the system water in a non-corrosive state from the outset.
The special blend of anion and cation resin not only targets minerals in the water but provides a significantly better exchange capacity towards acids and aggressive salts over standard resins available.
Xi+ is the premium quality mixed bed ion exchange resin from elector. The special blend has been engineered for the desalination of the fill & make-up water for heating/cooling systems.
Unlike other brands available on the market Xi+ can be used on live system for inline recirculation purposes where the existing system water can pass through the resin on a side stream basis gradually condition & improving the systems water quality.
This is possible as Xi+ can be operated in systems which run up to 90° C, for maximum capacity it is advisable to keep the water temperature at 60° C, however for systems which cannot have any reduction in service Xi+ is a great tool.
The mixed bed resin for complete desalination of the circulation water is ideally suited for heating/cooling water treatment and compliant with both VDI 2035 & VDI 6044.
Due to the special blend created for closed looped systems, we can prevent the pH value from falling into the acidic range when used within the capacity limits. Meaning at point of fill a pH 8> is possible.
Although many high-performance resins offer a high removal capacity, they only insufficiently remove the carbonic acid, which means that a low pH of 4-5 is not uncommon. Xi+ offers a safe removal of carbonic acid within the capacity range of <10 µS / cm, thereby avoiding a low pH value.
Xi+ is a premium quality resin, created in an ISO accredited facility, where it is subject to constant quality controls & frequently tested to ensure the desired levels are always achieved.
Xi+ ion exchange resin allows installations to become compliant with parameters set in Europe’s leading water tretament guidelines such as VDI 2035, VDI 6044, SWKI BT 102-01 & ÖNORM H 5195-1.
Facts in brief
- Ion exchange resin from elector is of the highest quality and can be used with all major brands of demineralisation fill stations available on the market.
- Due to the operating temperature of up to 90 ° C it is ideally suited for the desalination by the means of inline flushing while the system is still operational. Allowing for effective inline treatment without any down time.
- Ion exchange mixed bed resin with a high proportion of anions. Ion exchange mixed bed resin for full demineralisation = low conductivity and hardness.
- 100% new goods – no regenerated resin.
- Packed airtight – safe storage without loss of quality.